Harness test bench according to prEN 12875-1:2024

See also harness test bench according to EN-12875-1

Dishwasher test bench
Laboratory dishwasher GSL3 according to prEN 12875-1:2024 for testing the wash resistance of objects
incl. dishwasher MIELE GSL3
incl. LOGO! test bench control
incl. CE declaration of conformity

Test stand with Miele GSL3 laboratory dishwasher and special conversion by Weinmann Prüftechnik by Schmidt-Engineering to enable a test procedure exactly in accordance with prEN 12785-1:2024 Test: 60° standard specification.

The dishwasher washes at a temperature of 65°C for 20 (+/-5 min) without a pre-rinse cycle. The rinse cycle is carried out at 60°C. After the rinse cycle, a drying time is started with the door closed and then with the door fully open.
The water hardness must be set in the laboratory to 0.1786 mmol/l (approx. 1°DH) and made available to the test stand. An external water softening system must be installed in the laboratory for this purpose.
The test stand is equipped with a fully automatic dosing device for standard cleaning powder, including a water softener. Storage tank.
The internal tank of the MIELE GSL3 is used for rinse aid dispensing.
The pre-rinse, rinse and dry times are preset on the integrated test stand control unit in accordance with prEN 12875-1:2024.
However, they can also be adapted to other Miele GSL3 wash programmes at any time.
The test cycles are freely programmable.
All remaining running times are shown on the text display of the control unit.
The powder dosing and rinse aid dosing levels must be monitored manually.
All operating forces have been reduced to a safe level so that no injury to test personnel can occur.